24
Nov

Compelling guides on iron Wall

   Posted by: Lamps   in Wrought iron table lamps

wrought-iron-table-lamps Compelling guides on iron Wall

I fell in love with this piece when I saw it online. When it arrived I was even more pleased. In the picture you can’t tell that it’s a bit dimensional. The different shapes raise out by different amounts, some about an inch, some a half an inch and some not at all. This really adds to the beauty. It’s well made and easy to hang. I highly recommend it.

What’s a good website or place iron Wall to go to find cool wrought iron wall decor?
Array
Powered by Yahoo! Answers

castello-iron-wall-candle-holder-sconce-gothic-metal
fleur-de-lis-over-the-door-monogrammed-iron-wall-grille
lot-of-2-wrought-iron-wall-plaque-candle-holder-46-h-84458
yin-yang-salamanders~handcrafted-rustic-iron-wall-sculp
fleur-de-lis-over-the-door-monogrammed-iron-wall-grille
old-world-bronze-scrolled-iron-fireplace-screen-french
large-wrought-iron-wall-plaque-decor-40-x26-86187
country-home-white-wrought-iron-scroll-wall-mail-rack-3-pocket-letter-organizer
new-iron-candle-holder-5-shabby-wall-decor-large-sconce
iron Wall


Related External Links

Related External Links

wrought-iron-table-lamps Compelling guides on iron Wall

Tags: , , , , , , , , ,

This entry was posted on Thursday, November 24th, 2011 at 9:16 pm and is filed under Wrought iron table lamps. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

20 comments so far

Golden
 1 

It was wider than some of the other ones we looked at so we knew our iron would fit in it. And it arrived sooner than we expected.

November 24th, 2011 at 11:13 pm
Barnett
 2 

My iron (Black and Decker) didn’t fit. It hang’s over the edge where the iron would normally fit but still serves the purpose for which I purchased it for. Other than that I like the product. It’s sturdy and was easy to mount.

November 25th, 2011 at 10:51 am
Feldmann
 3 

this holds my rowenta ironing board and iron and is mounted on the laundry closet’s door. this one’s quite a toughie as it holds quite a lot of weight and keeps everything in order. the gaps on either side makes room for the long cord. the hardware that comes with it didn’t seem like it would hold the weight very well but after mounting it on a wood door, it’s not going anywhere. but if you must mount it on a drywall, use either a molly or a toggle bolt to mount it in place as the hardware that comes with it seems like it would only work on wood.

November 25th, 2011 at 10:39 pm
Nordstrom
 4 

Sturdy and worth the price. Has a heavier plastic, quality feel to it. Product looks great on the wall in my sewing room.
Easy to install. Just the usual pain installing on drywall. I have one screw into a stud and an anchor behind the other. Both screw holes are elongated to allow for leveling adjustment. One is vertically elongated and one is horizontal. I installed it at a height where the bottom legs of the ironing board hit the baseboard when it is hanging. The holder keeps the top legs off the wall very nicely. So, no marks on the wall.
My ironing board has T-shaped legs with a diagonal brace at the bottom. Fits just fine.

November 26th, 2011 at 10:48 am
Guest
 5 

I bought these for my dining room and they look great! They are worth the money and look great.

November 26th, 2011 at 10:28 pm
Enright
 6 

Another sturdy, thick wrought iron product! I placed these 2 little beauties on both sides of a designer mirror and watch out for all the attention from your guests! Makes a perfect companion to the 5 candle wrought iron sconce I just bought also!

November 27th, 2011 at 11:06 am
Fearman
 7 

These sconces were a nice surprise. I really like the way they look on my wall. They actually look better than the picture. I bought some 4″ ivory flameless candles to set on them and they look great.

November 27th, 2011 at 10:23 pm
Nasser
 8 

These sconces are lovely! I put them on either side of a square mirror that we have in our dining room and they really make the look! Up close, the color looks old and peeling, but I don’t mind that at all.

November 28th, 2011 at 10:46 am
Cardena
 9 

This wall art is very nice.
the colors, the size.
The difficult part now is to decide where to hang it on.
its great for many places.

November 28th, 2011 at 10:49 pm
Bigger
 10 

The picture doesn’t do it justice! I was very surprised when I opened it and found the colors are more vivid than what’s shown. I also love the dimentional aspect of the piece and it’s light weight which made it easy to hang. I was surprised that it did not come with screws, but we have plenty so it wasn’t a problem. Just be aware that you’ll need them. I don’t think you’ll be dissappointed if you order it!

November 29th, 2011 at 10:41 am
Jenkins
 11 

It’s a beautiful clock and well made. My only complaint is that it’s pretty loud. Other than that, it’s exactly what I wanted.

November 29th, 2011 at 10:29 pm
Easley
 12 

We were pleased with this metal clock. It looks nice in the reception area of our office. I think it would look even nicer against a wall painted something other than white.

November 30th, 2011 at 11:06 am
Gearin
 13 

The clock looked good and was sturdy. It keeps good time. It was what I expected and I’m happy with it, but it is extremely loud. Fortunately, I gave it to an elderly person who is hard of hearing, so it doesn’t bother her. But I would not be able to have this in my own home at all because of the distraction of the ticking. If not for that, I would give it 5 stars.

November 30th, 2011 at 11:10 pm
Izell
 14 

I received this clock recently and was delighted by its appearance, but unfortunately the second hand gets stuck and does not advance around the dial. Had to send it back. Didn’t bother to order a replacement, because this is a pretty basic flaw. At this price, it looks like you get (less than) what you pay for.

December 1st, 2011 at 10:48 am
LaFleur
 15 

We bought the Polder OTD Iron/Board Wall Mount for $9.99 at a hardware store.

The assembly is straightforward and simple, (it literally takes about two minutes,)and the metal seems strong.

We have a T-shaped footing on our ironing board, not the Y shaped like in the picture, and so our board hangs perfectly. But I really don’t see how a Y foot board would be that sturdy hanging on the hooks. (Others Amazon reviewers have brought this up.) Our iron, when the cord is wrapped around the bottom, sits nicely on the holder. The iron holder has a pretty substantial lip on it so I don’t think it is going anywhere. Our iron can sit, full of water, and not leak, which was something I was worried about when I first looked at the product.

The part that secures the rack over the top of the door is big enough to accomodate a substantial width, but this could create problems if you have a really thin door. With too much play the whole rack could shift around quite a bit when opening and closing the door.

The door we have it on is average sized and if we open the door very quickly, the ironing board will swing a bit and bump against the door. Fortunately, we are storing it on the back of a closet door that we don’t open frequently.

One word of warning: the hooks for the legs of the ironing board hang down quite low from the top of the door. If you have an extra large ironing board, or an extra short door, you may want to do some measuring before you buy, otherwise you may end with the ironing board hitting the floor. (As one reviewer here, and several elsewhere have noted.)

December 1st, 2011 at 11:00 pm
Lauderdale
 16 

I bought a Polder ironing board from Amazon and figured the Polder holder should work. Wrong. The arms are too flimsy and they twist under load. The ironing board then falls out.

December 2nd, 2011 at 10:57 am
Blair
 17 

I purchased this Ironing Board Hanger cause I have a ‘Y’ shaped board like the one in the picture. When you hand the board on it, the hanger twists a little thus not hanging flat against the closet door. Also, the whole contraption hangs too high up so the door won’t even close when the actual iron is on it.

December 2nd, 2011 at 10:54 pm
McGinnis
 18 

I agree with other reviews that this device does NOT work with ironing boards with angled legs (as pictured). You do need a T-leg board.

It is also a bit fickle with the size of the iron. If your iron is either really wide or really thin, it may not sit in the holder very well.

You also need to be gentle when closing the door that this is hanging on. While the top part stays secure, the bottom part of the iron can still swing. I have gotten used to this over time.

Other than that, it is a better looking device than some other ironing board holders. It’s not very bulky or complex.

December 3rd, 2011 at 10:28 am
Currey
 19 

I am extremely pleased with the holder.It supports the ironing board and the iron very well.I’ll recommend this product to any of my friends who may be in need of organizing his house.It’s the best for a larger iron like Rowenta master.

December 3rd, 2011 at 11:13 pm
Dominski
 20 

Ay carumba! This is the only ironing board holder I could find that would accommodate the Rowenta board that I purchased during a Martha Stewart induced lapse of judgment. This thing assembles, yes, assembles, easily and quickly but doesn’t stay assembled through the mounting procedure and kept popping apart on me. Also, as someone mentioned, the crappy wall plugs they include are a joke; I ran out to buy the screw-in wall board plugs and finally got it installed using those. The iron rest is too narrow to hold my iron.

December 4th, 2011 at 11:03 am